Faceted Gold Twist Belt

¥36,750
HPN150BLACK
  • Features
    This Gold plated belt has the iconic facet shape buckle, use the simple twist mechanism by pulling the buckle and twisting to reverse the belt and show either the black Chassis print or plain black finish.

    The buckle is constructed from polished green gold plate, featuring the Alfred Dunhill vintage logo on the buckle keeper.
  • Technical Details
    • Black cowhide leather strap with Chassis print and plain black reverse.
    • Polished green gold plated buckle.
    • 30mm width.
    • This belt has been designed to be cut to the exact length.
    This means you have a belt that has been specially and uniquely fitted to you, rather than having to buy a belt that is only approximately the right length.
    The belt strap is simple to cut with a sharp pair of scissors and can be done either as a free service on one of our dunhill stores or at home.
    To ensure that you cut it to the right length, you can either measure yourself around the waist, or measure the belt that you normally wear from the end of the strap by the buckle to the hole normally use.
    Remove the buckle, releasing the mechanism on the back of the buckle and measure the same length on the strap of the new belt – make sure you do this from the centre hole, or the one you prefer to use, to the end where the buckle fits.
    Always cut the belt a little longer than you measured – this will allow you to make further adjustments when you try it on for size.