Enamel Panel Belt

$265.00
BPN130BLACK
  • Features
    This belt is a classic design. It has a contemporary edge from the clean edged Stainless Steel buckle.
    This belt is also reversible, giving a choice of a plain black or a brown Saffiano print side.
  • Technical Details
    Strap: Smooth Black Cowhide Leather with Dark Brown Saffiano Print Reverse.
    Buckle: Brass with Polished Ruthenium (Gunmetal) Plate and Enamel Insert.
    Width: 30mm.
    • This belt has been designed to be cut to the exact length.
    This means you have a belt that has been specially and uniquely fitted to you, rather than having to buy a belt that is only approximately the right length.
    The belt strap is simple to cut with a sharp pair of scissors and can be done either as a free service on one of our dunhill stores or at home. .
    To ensure that you cut it to the right length, you can either measure yourself around the waist, or measure the belt that you normally wear from the end of the strap by the buckle to the hole normally use.
    Remove the buckle, releasing the mechanism on the back of the buckle and measure the same length on the strap of the new belt – make sure you do this from the centre hole, or the one you prefer to use, to the end where the buckle fits.
    Always cut the belt a little longer than you measured – this will allow you to make further adjustments when you try it on for size.
Match with
  1. Flat Front Charcoal Trousers
  2. Classic White Short Sleeve Polo